ZyXEL IES-5005M 4U IP DSLAM with DC Power

Features & Benefits:

• Non-blocking Gigabit Backplane
• IEEE 802.1p Priority Queuing, Packet Classification and Queue Scheduling (SP, WRR)
• VLAN Bridging, VLAN Trucking, and VLAN Stacking
• IGMP v1, v2 Snooping and Proxy
• 256 Multicast Groups
• Anti IP/MAC Address Spoofing
• Rule-based Packet Filtering
• Failover Network Termination
• Single/Dual End Loop Test
• ATM Forum TM 4.0

Service Aware
As a flagship product line of ZyXEL’s IPDSLAMs, the IES-5000/5005 Series is equipped with non-blocking Gigabit backplane, failover-enabled Management Switch Cards (MSC), dual power modules and high-port density DSL line cards.
With embedded IP-centric QoS, security and multicasting firmware features, the IES-5000/5005 is a chassis-based system that facilitates Telco/ISP delivering quality experience to today’s demanding residential and business customers. Such features enable it to achieve its infrastructure provisioning criteria of reliability, flexibility and scalability at competitive CAPEX/OPEX.

Scalability
ZyXEL’s IES-5000 is a 6.5RU height and 10-slot chassis-based system with a separated 5RU splitter frame. Two of the 10 slots are reserved for Management Switch Cards (MSC) and the remaining eight slots are reserved for DSL line termination cards. The ADSL2/ADSL2+/G.SHDSL.bis line cards have 48 ports while the VDSL2 line card comes with 24 ports. In a standard rack, you can install up to seven units without a splitter chassis or up to four units with a splitter chassis. The MSC has four GE ports for uplink and subtending. With the subtending feature, the IES-5000 can be cascaded in the rack at a central office, or be connected to remote IES products in the form of a tree, ring, or daisy-chained as needed. The uplinks can be used as a traffic aggregation trunk or set to work in 1+1 redundant mode. Additionally, install two Management Switch cards (MSC) for link redundancy and failover support. In case an MSC fails, the second MSC takes over control within one second.

The compact design of IES-5005 offers a 4RU-height and five-slot chassis-based system with a separated 3RU splitter frame. One slot is reserved for an MSC card and the remaining four slots are for DSL line termination cards. The ADSL2/ADSL2+/G.SHDSL.bis line cards have 48 ports while the VDSL2 line card comes with 24 ports. In a standard rack, you can install up to tenunits without a splitter chassis or up to six units with a splitter chassis. The IES-5005 supports Remote Terminal (RT) and uses the same MSC and line cards as the IES-5000.

Multiple Standard DSL Services
Four hot swappable DSL line cards (ADSL2+ over POTS, ADSL2+ over ISDN, G.SHDSL, and VDSL2) are available. The ADSL2+ over POTS and the ADSL2+ over ISDN give subscribers with asymmetric transmission bandwidth of up to 25 Mbps/1.2 Mbps. The G.SHDSL.bis provides symmetric transmission bandwidth of 4.096 Mbps, 8.192 Mbps or up to 16.384 Mbps (similar to a lease line). The VDSL2 offers up to 65 Mbps/35 Mbps high speed connectivity per port with various loop distances over copper wiring.

Advanced Triple Play Functionality
The IES-5000/5005 provides complete ATM QoS (UBR/VBR/CBR) and Ethernet L2 QoS on the line cards. The IP QoS (Packet classification/Rate Limiting/Queue Scheduling) is provided on the Network Termination cards as well. Sophisticated PVC to VLAN bridging and aggregation enables end-to-end QoS and various service allocation and provisioning. In addition, the IES-5000/5005 supports non-blocking traffic forwarding and multicast features with up to 256 multicast groups and 384/192 members per group. The IES-5000/5005 can process more than 30 multicast IGMP join/leave requests per second and the maximum channel processing time is less than 250ms. For security, the IES-5000/5005 provides anti MAC/IP address spoofing, broadcast storm prevention, MAC count limiting, and policy-based packet filtering. All these features allow ISPs/Telco operators to provide High Speed Internet access, VoIP, Near VOD, Broadcast TV and TV on demand, and other features easily.

Robust Physical Safety Design
ZyXEL’s IES-5000/5005 guarantees physical safety by embedding voltage, temperature and fan speed sensors. When an abnormal condition is detected, the LED displays and/or the corresponding alarms alert you to the situation. In cases when the system temperature goes higher than the configured threshold, thermal cutoff protection kicks into action and the system will shut down automatically.

Sophisticated OAM&P Element Management System (EMS)
ZyXEL’s IES-5000/5005 provides various management methods: local console port, Web-based configuration, Telnet, and SNMP v1/v2/V3-based EMS (NetAtlas Access EMS). Management functions such as Alarm and Status Surveillance, Configuration management, Performance management, and Fault management are included. The IES-5000/5005 allows you to create multiple administrative accounts and three levels of access rights. Accounts with the first-level privilege have full access rights. Second-level privilege accounts have the same access rights as first-level accounts except for account management. Third level accounts can only view configuration settings and performance statistics. NetAtlas Access EMS also provides view-based MIB management and XMLbased north bound interface. These features allow Telco operators to provide wholesale service to smaller CLECs and ISPs.

Specifications:

IES Series IP DSLAM Family Matrix:

Application Diagram:

System Architecture:

Documentation:

Download the ZyXEL IES 5000M/IES 5005M Datasheet (PDF).